—— Wira
IEC61032 Test Probe 13 Short Test Pin
|
IEC 61032 Test Probes for Verification and Testing The Protection Against Access to Hazardous PartsProduct Description Model Describe Reference standard Specification LX1201 IEC 61032 Figure 1 - Test probe A IEC60529 IEC61032 Ball diameter: 50 mm Baffle plate diameter: 45 mm Baffle plate thickness: 4 mm ... Read More
2016-06-13 17:17:32
|
IEC Jointed and Unjointed Test FingerProduct Description The Jointed Test Finger & Unjointed Test Finger is a precision test probe made according to Figure 2 (Test Probe B) and Figure 7 (Test Probe 11) of the IEC 61032 is used to simulate a human ... Read More
2016-06-12 16:19:41
|
Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test FingerProduct Description Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger Product information: Children finger probe 18 conforms to IEC61032 figure 12 finger probe 18, IEC335.1,UL1017 ... Read More
2016-06-12 15:58:49
|
IEC61032 Test Probe,Test probe c, test probe d,2.5mm test probe,1mm test probeProduct Description 1) 2,5mm Test Rod Probe of IEC 61032 Figure 3 - Test probe C This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify protection ... Read More
2016-06-12 14:37:55
|
IEC61032 Figure 8 Test probe 12, Safety Test Probe 13 IEC61032 Fig. 91) Long Test Pin of IEC 61032 Figure 8 - Test Probe 12 This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to ... Read More
2016-06-12 14:19:16
|
Test Probe a of IEC 61032 Test MachineIEC61032:1997 / IEC61032:2008 / BS EN61032 / CEI 61032 IP1X Test Probe A with 50N Force Specification: IP1X Probe A /Test Probe A 1, According to : GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 and UL 2, IP1X ... Read More
2016-04-27 16:55:38
|
Test Probe Kit of Jointed Finger Probe & Test Pin Probe & Test Thorn ProbeMeets IEC61032,GB4706.1-2005. Accessibility probes are used to test the size of openings to ensure that fingers and objects do not have access to hazardous parts in equipment and machinery. SPECIFICATIONS 1. ... Read More
2016-04-26 16:25:07
|
Short Test Pin for Electrical Safety Testing LaboratoryIEC 61032 Test Probe 13 meets IEC CSA & UL requirements This pin probe is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536). ... Read More
2016-04-26 11:42:35
|
IEC61032 2.5mm Test Rod ProbeBasic Introduction: Used to verify protection against access to hazardous parts by use of a tool through holes which give access to pre-set controls. Meets IEC, EN, UL and CSA Standards including IEC 1010, EN ... Read More
2016-04-25 16:32:21
|
IEC61032 Rigid Test Probe with 50n ForceIEC60065 IEC61032 Test Probe pin 11 Key Words: Test Probe Pin, Test Probe 11, Test Pin, Test Probe 11 Appliance: It's the necessary tool to proceed protecting electric shock test of household and similar ... Read More
2016-04-25 16:30:28
|
IEC60061-3 E27 Lamp cap go gauge and no go gauges
IEC60061 B22 Go No Go Gauge of 7006-11-8 & 7006-10-8
Ipx3 Ipx4 Hand-Held Spray Nozzle
IEC 60529 Ingress Protection Test Probe Kit of Access Probes
Manufacture High Precision IEC60950 Telecom Test Probe