IEC 61032 Figure 16 Test Cone for Access Probes to Hazardous Hot or Glowing Parts This probe is intended to verify the basic protection against access to glowing heating elements. Conforms to: Standard IEC61032... Read More
UL 60950 Figure NAF2 S5366 and NAF3 S5370 Wedge Probe for Test Document Paper Shredders UL 60950 Wedge Probe for Paper Shredders 1. Specification: Length: 300 mm Bent finger diameter: 12 mm Bendable Section: 30... Read More
IEC 60335-2-24:2010 Figure 102 - Detail of Scratching Tool Tip of Hard-soldered Carbide Tip K10 1. The scratching tool tip is for home appliances whose accessible element surface of all protected cooling system... Read More
IEC 61032:1997 Figure 14 Milling Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system ... Read More
UL 1205 / IEC 60475 / IEC 60335-1 Figure 7 - Test Finger Nail with 30N Force Gauges Finger Nail Test Probe with 30N Force Appliance: The Finger Nail Probe is indicated test IEC60335 and UL requirements. Used to ... Read More
IEC61032 Test Probe 12 Appliance: It's the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Purpose: This pin probe is intended to be used on appliaces ... Read More
IEC 60529 / DIN 40050-9 IP2XC 12.5mm Test Probe of Rigid Sphere with Handle 1. According to the DIN40050 IEC60529; 2. 12.5MM test probe is necessary appliance for household and similar electrical appliance of ... Read More
IEC60320-1 / IEC60598-1 / IEC60950-1 / IEC60884-1 / CEI60968 / IEC60695-10-2:2003 / EN IEC60335-1 Ball-pressure Apparatus 1. Introduction: Ball pressure tester is used for testing parts of non-metallic ... Read More
IEC61032-2008 Figure 15 Test Probe 32 Test Thorn for Testing The Fan Prevention Safety This rod is intended to verify the protection provided by fan guards against access to hazardous mechanical parts. IEC61032 ... Read More
